Epoxy Resin Systems
Epoxy resin systems for infusion, RTM, tooling and structural bonding.
Epoxy Resin Systems
Product Overview
Advanced epoxy resin systems for aerospace, UAV, tooling, automotive, marine, and high-performance composite structures. The product range includes systems for vacuum infusion, hand lay-up, RTM, prepreg tooling, structural bonding, and high-temperature applications. Designed for excellent wetting of carbon, glass, and aramid reinforcements with high mechanical performance and thermal stability.
Request a Quote
Typical Applications
- Aerospace structural laminates
- High-temperature composite tooling
- UAV and drone structures
- Vacuum infusion and RTM components
- Structural bonding and repairs
- Surface gel coats and tooling coatings
Product Range
Product Range & Specifications
Scroll each table horizontally to view all specifications.
Typical Epoxy Resin Systems
| System | Application | Process | Viscosity @25°C (mPa·s) | Mix Ratio | Pot Life | Special Features |
|---|---|---|---|---|---|---|
| LT-5028A/B | Vacuum Infusion | Infusion / RTM | 1400–1800 | 100:30 | 1–4 h | Low viscosity, GL certified |
| LT-5089A/B | Hand Lay-up | Hand Lay-up / RTM | 2200–3200 | 100:30 | 15–50 min | Fast cure, GL certified |
| ML-5417A/B | High-Temp Tooling | Infusion / RTM | 900–1300 | 100:30 | 80–110 min | High Tg, low viscosity |
| ML-5419A/B-15 | Composite Moulds | Infusion / RTM | 1300–1800 | 100:22 | — | High temperature resistant |
| ML-5816A/B | Tooling & Moulds | Hand Lay-up | 2000–6000 | 100:30 | 50–120 min | Room-temp cure + post cure |
| ML-8190A/B | Ultra High Tg Structures | Infusion / RTM | 1400–1900 | 100:45 | 140–220 min | Tg >180°C |
| AM-8970A/B | HP-RTM Structures | RTM / HP-RTM | 15000–18000 | — | — | High Tg >180°C |
| QC-360A/B | Fast Infusion | Vacuum Infusion | 1400–1800 | — | Fast cure | Room-temperature curing |
| MG-7103A/B | Tooling Epoxy Gelcoat | Brush / Coating | 4000–5300 @50°C | 100:30 | 70–150 min | Polishable, high-temp |
| LG-7003A/B | Protective Gelcoat | Brush / Roller | 450–900 @50°C | — | Rapid cure | Excellent FRP adhesion |
| AD-1056A/B | Structural Adhesive | Bonding / Repair | 30–85 Pa·s | 100:55–80 | 20–50 min | Metal & FRP bonding |
| AD-1058A/B | Composite Adhesive | Bonding / Repair | Paste System | 100:25–35 | 15–70 min | FRP repair and bonding |
Technical data shown for reference only. Final material selection and processing parameters should be validated according to customer application requirements.
Contact
Discuss your composite manufacturing requirements.
Tell us about your material, equipment or tooling requirements.
- Abu Dhabi, Al Majarat St, Al Danah, UAE
- +971 58 538 6625
- sales@h-composites.com